Fabreeka® pads, washers, bushings and OEM parts are scientifically designed and manufactured from materials composed of layers of tightly twisted, closely woven lightweight duck. Each layer is thoroughly impregnated with an elastomeric compound containing mold and mildew inhibiting agents and is impervious to oil and most chemicals. Designed for long service life in impact or vibration applications, Fabreeka® pads have great strength, up to 12,000 psi, and exceptionally high damping. Fabreeka® pads absorb impact shock and reduce the destructive effects of vibration and structure-borne noise. The Fabreeka® pads are supplied to your size and shape specifications with a variety of thicknesses available. Click for more detailed specifications on our Fabreeka® pads, bushings, washers or OEM parts.

Fabreeka® Crane Rail pads are designed to relieve girder stress, improve load distribution, eliminate mechanical wear of flange or cover plates, damp vibration and reduce noise. The LTP section of the crane rail pad improves wear resistance, restricts lateral movement and provides a low coefficient of friction support for the rail. Tests performed by independent sources have shown up to a 40% reduction in runway beam web stress and noise levels reduced substantially when the Fabreeka® Crane Rail pad was installed. Click for more detailed specifications for our Fabreeka® Crane Rail pads.

Fabreeka® Structural Expansion Bearings are used to accommodate thermal expansion and beam-end rotation. Teflon sliding on mirror-finished stainless gives the low coefficient required while the Fabreeka® bearing pad distributes loading, compensates for irregularities of bearing surfaces, absorbs impact shock and reduces erection costs. The SBX Expansion Bearing has a high-load capability, which minimizes pad size and space requirements and can offer a low profile where space is a problem. Click for more detailed specifications for our Fabreeka® Structural Expansion Bearings.

SA-47 pads are constructed of all new, high quality elastomers containing a random distribution of synthetic fibers which are vulcanized and cured into a slab form to several standard thicknesses. The SA-47 bearing pads have shown excellent service performance in severe use where they are subjected to impact forces, climactic extremes of temperature and moisture and exposure to sand and salt. The inclusion of randomly distributed synthetic fibers yields a bearing pad with much more attractive physical properties (compressive strength, limited creep, etc.) when compared with unreinforced neoprene bearing pads. Click for more detailed specifications for our SA-47 pads.

Fabcel® pads are manufactured from a high-quality elastomer molded into 18" x 18" scientifically designed vibration and shock isolation pads. Fabcel® pads may be cut to sizes smaller than 18" x 18" or placed side by side for areas larger than 18" x 18" and stacked for softer systems. The Fabcel® pad surfaces have patented molded recessed offset cells to allow flow of the elastomer when under load, while maintaining lateral stability. Click for more detailed specifications for our Fabcel® pads.

Fabcel® LeveLers provide superior shock and vibration isolation while eliminating the need to grout or bolt equipment to the floor. Fabcel® LeveLers are designed for fast, simplified and precise leveling. The standard series Fabcel® LeveLers can be supplied for load ranges from 35 lbs to 450 lbs per mount. Fabcel® Swivel LeveLers can be supplied for maximum load ranges of 2,100 lbs to 8,400 lbs per mount. If supplied with a patented Fabcel® pad, the mount will control shock, vibration and will not allow equipment to creep. Click for more detailed specifications for our Fabcel® LeveLers.

Fabcel® Lev-L® Mounts provide superior shock and vibration isolation while eliminating the need to grout or bolt equipment to the floor. Fabcel® Lev-L® mounts are designed for fast, simplified and precise leveling. Depending upon your particular requirements, Fabcel® Lev-L® mounts can be supplied in load ranges from 125 lbs to 12,000 lbs per mount with a separate bolt, or in load ranges from 300 lbs to 25,000 lbs per mount with integral bolt. Click for more detailed specifications for our Fabcel® Lev-L® Mounts.

DIMFAB pads are manufactured from a low durometer elastomeric compound that meets the qualification requirements for Distributed Isolation Material (DIM) specified for use in US Navy submarines and surface ships. These pads are available in standard 18" x 18" pads, can readily be cut to any desired shape or size for easy installation and are specifically designed to perform successfully in applications where DIM mounts are required. Click for more detailed specifications for our DIMFAB pads.